SOLAR CHARGE CONTROLLER KENIKA EM2460 MPPT 12V/24V AUTO 60A EXPLORER M SERIES
Description
Kenika EXPLORER-M Series EM-2460
Self-cooling MPPT Solar Charge Controller
Solar Charger Controller adalah peralatan elektronik yang digunakan untuk mengatur arus searah yang diisikan ke baterai dan diambil dari baterai ke beban. Tanpa solar controller, baterai akan mudah rusak dikarenakan oleh over charging & ketidakstabilan tegangan.
Solar controller Kenika Explorer-M Series adalah generasi terbaru dari solar charge tipe MPPT (Maximum Power Point).
Yang mempunyai banyak keunggulan antara lain:
1. Self-heating, perlindungan terhadap panas (grade IP43)
2. Desain yang indah, dengan tombol sentuh
3. 4 tahap pengisian untuk memperpanjang masa pakai baterai
4. Teknologi MPPT dengan efisiensi 99,8%
5. Fungsi proteksi/perlindungan yg sempurna
6. Monitoring sistem untuk seluruh status, menentukan pencocokan sistem, dll.
7. Dapat diparalel untuk sistem yg lebih besar
Specifications:
MODEL | EM2460 | |
PRODUCT CATEGORY | ||
MPPT Efficiency | ≥ 99.5% | |
Standby Consumption | 0.5W~1.2W | |
Heat-Dissipating Method | Natural-Cooling | |
Battery System Voltage Range | 12V System | 9VDC~15VDC (Lead Acid) |
24V System | 18VDC~30VDC (Lead Acid) | |
Li-ion | 8VDC~30VDC (Default), ≤ 30VDC (Optional Activation Function) | |
INPUT CHARACTERISTICS | ||
Max.PV Input Voltage (Voc) | 100VDC (Default), DC 150V (Optional) | |
Min.Vmpp Voltage | Battery Voltage + 2V | |
Start-Up Charging Voltage | Battery Voltage + 3V | |
Low Input Voltage Protection | Battery Voltage + 2V | |
Over Voltage Protection/Recovery | 100VDC/95VDC (Default), 150VDC/145VDC (Optional) | |
Rated PV Power | 12V System | 780W |
24V System | 1560W | |
Li-ion | 756W~1512W | |
CHARGE CHARACTERISTICS | ||
Activation for Lithium Battery | Optional | |
Battery Types (Default Gel Battery) | Sealed (SEL), Gel (GEL), Flooder (FLD), User-Defined (USE), Li-ion (Lit) | |
Rated Charge Current | 60A | |
Temperature Compensation | -3mV/°C/2V (Default) | |
Charge Method | 3-Stages: CC (Constant Current), CV (Constant Voltage), CF (Floating Charge) | |
Output Voltage Stability Accuracy | ≤ ± 0.2V | |
LOAD CHARACTERISTICS | ||
Load Voltage | Same as Battery Voltage | |
Rated Load Current | 30A | |
Load Control Mode | On/Off Mode, PV Voltage Control Mode, Dual-Time Control Mode, PV + Time Control Mode | |
Low Voltage Protection | 10.5V (Default), 11V (Restored), Settable | |
Setting Method | PC Software/APP/Controller | |
DISPLAY & COMMUNICATION | ||
Display | High-Definition LCD Segment Code Backlight Display | |
Communications | Dual RJ45 Port/RS485 Protocol/PC (via RS485-USB Cable) & APP (via Wi-Fi Module)/Centralized Monitoring (via Parallel Connection and RS485-USB Cable) | |
OTHER PARAMETERS | ||
Protections | Input & Output Over-Volt/Low-Voltage Protection, Reverse Polarity Protection, Over Heating Protection, Battery Shedding Protection, etc. | |
Operating Ambient Temperature | -20°C ~ +50°C | |
Storage Temperature | -40°C ~ +75°C | |
IP (Ingress Protection) | IP43 | |
Noise | ≤ 10dB | |
Altitude | 0~3000m | |
Max. Wiring Size | 28mm² | |
Recommended Breaker | ≥ 100A | |
Nett Weight | 2.35kg | |
Gross Weight | 2.78kg | |
Product Size | 245 mm × 170 mm × 63.5 mm | |
Packing Size | 334 mm × 255 mm × 123 mm |