UPS Kenika MS-120KVA 3 Phase

Brands Kenika

Product Code: MS-120KVA

Add to wishlist

Dimensions (L x W x H): 70 x 80 x 180 (Centimeter)

Rp340,000,000.00

Quantity:

Tags: UPS

Product details of UPS Kenika MS-120KVA 3 Phase

Description

UPS online MS-120KVA menghasilkan tegangan output yang sangat stabil saat terjadi perpindahan dari listrik utama/PLN ke baterai dan mempunyai gelombang sinus murni, sama seperti gelombang listrik yang dihasilkan oleh PLN. Penggunaan UPS MS-120KVA sangat direkomendasikan untuk beban yang sensitif seperti peralatan laboratorium, peralatan kedokteran, komputer server atau beban sensitif lainnya.

UPS MS-120KVA memiliki fitur ECO Mode yang memberikan efek hemat energi serta memiliki proteksi terhadap pengisian berlebih, pelepasan daya berlebih, korsleting, beban berlebih, dan proteksi lonjakan arus listrik.

FITUR
1. Realisasi keaslian konversi ganda sistem online berfrekuensi tinggi
2. Performa mesin tinggi dengan menggunakan teknologi DSP
3. Fitur pemutus daya darurat (EPO)
4. Desain 3 tahap pengisian daya yang dapat diperpanjang, untuk memastikan baterai memiliki performa terbaik
5. Penerapan fitur N+X paralel

Specifications:

MODEL	MS-120KVA
Rated Capacity	120KVA/120KW
UPS Size	700×800×1800 mm
Nett Weight	650 kg
INPUT
Input Phase	3 phases 5 wires (3⌽+N+PE)
Input Rated Voltage	380VAC/400VAC/415VAC (Default 380VAC)
Variable Input Voltage Range	304V-456V
Input Frequency Range	40Hz-70Hz
Input Power Factor	>0.95
Input Current Limit	1.25 times the rated current (0.1-1.25 can be set)
Rectifier Delay Start Range	Default 10s (1-300s can be set)
Bypass Input Voltage Range	Upper limit 10% - 25% can be set, Default 20%; Lower limit 10% - 60% can be set, Default 20%
Battery Voltage	Default 360VDC (336VDC, 348VDC, 372VDC, 384VDC can be set)
Number of Batteries	Default 12V 30pcs (28-32pcs can be set)
Battery Charging Current	Charging rate * battery capacity * battery pack number (charging rate, battery capacity and battery pack number can be set)
ECO MODE
Bypass Voltage Range	Upper limit 5% - 15% can be set, Default 5%, Lower limit 5% - 15% can be set, Default 5%
Bypass Frequency Range	±1Hz - ±3Hz can be set, Default ±2Hz
OUTPUT
Output Phase	3 phases 5 wires (3⌽+N+PE)
Rated Output Voltage	380VAC/400VAC/415VAC (Default 380VAC)
Output Voltage Regulation	±1%
Output Voltage Trimming	0V (±1 - ±5V can be set)
Output Frequency Accuracy	Mains mode: tracking bypass input in synchronization state; battery mode: 50Hz/60Hz±0.1%
Output Power Factor	1.0
Output Waveform Distortion	≤2% (Linear load); ≤5% (non-linear load)
Waveform	Pure sine wave
Output Current Crest Factor	3:1
Inverter Overload Capacity	When the load is <105%, it can work for a long time;When 105%<load<110%, it will switch to bypass output after 60 minutes;When 110%<load<125%, switch to bypass output after 10 minutes;When 125%<load<150%, switch to bypass output after 1 minutes;When load>150%, switch to bypass output after 20 minutes
SYSTEM
System Efficiency	Online mode: >93%, ECO mode: >98%
Transfer Time	0ms
Number of Parallel	≤8 sets
Protective Function	Output short circuit protection, output overload protection, over temperature protection, battery low voltage protection, output over and under voltage protection, fan failure protection, etc.
Communication Interface	Standard: USB, CAN, EPO, RS232, RS485, dry contact; Optional: SNMP card, temperature compensation accessories
Display	7 inch LCD touch screen
ENVIRONMENT
Operating Temperature	0-40°C
Storage Temperature	-25°C - 55°C (exclude battery)
Relative Humidity	0%-95% (No codensation)
Altitude	Capacity de-rates by 1% for every 100m over 1000m
Degree of Protection	IP30
Noise	<65dB (1 meter from the device)

Recommended for you