Kenika Portable Solar Generator 500W PIM500-Li
Description
Kenika Portable Solar Generator PIM500-Li 500W adalah pembangkit tenaga listrik multifungsi yang menggunakan energi dari matahari untuk menghasilkan output gelombang sinus murni. Generator tenaga surya ini mengintegrasikan baterai lithium 12.8V 50Ah, 30A MPPT solar charge controller, dan inverter 500W menjadi sistem yang kompak untuk mengubah energi matahari menjadi arus listrik.
Dengarkan semua musik dan berita favorit Anda dengan memilih stasiun radio favorit Anda. Selain itu, Anda dapat menggunakan pemutar MP3, flash disk USB untuk mendengarkan lagu musik secara offline.
Kenika Portable Solar Generator PIM500-Li 500W tidak hanya menyediakan output DC untuk aplikasi daya DC seperti lampu LED, kipas DC, tetapi juga menyediakan port USB untuk mengisi daya perangkat elektronik konsumen seperti ponsel dengan cepat.
Speicifications:
MODEL | PIM500-Li | |
Phase | 1-Phase In/1-Phase Out | |
Rated Power | 500W | |
Dimension (D×W×H) | 310 × 213 × 240 mm | |
Box Dimension (D×W×H) | 390 × 300 × 355 mm | |
Nett Weight | 10.77 kgs | |
Gross Weight | 13.7 kg | |
INPUT | ||
Voltage | 220VAC (+25%, -35%) | |
Frequency Range | 50Hz/60Hz (Auto Sensing) | |
OUTPUT | ||
AC Ouput | AC Voltage Regulation (Batt. Mode) | 20VAC ± 5% |
Frequency | 50Hz/60Hz ± 0.5% | |
Surge Power | 1500W | |
Efficiency (Peak) | 83% | |
Transfer Time | ≤8ms | |
Crest Factor | 3:1 | |
Waveform | Pure Sine Wave | |
DC Output | DC Voltage | 12VDC |
DC Current | 2A * 4 Ports / 30A Socket | |
High-Voltage Protection | 16VDC | |
High-Voltage Recovery | 15.2VDC | |
Low-Voltage Protection | 11VDC | |
Low-Voltage Recovery | 12.6VDC | |
USB Interface | 5VDC 3A * 8 Ports | |
LED LIGHTING | ||
Emergency Light | Power | 3W |
Input Voltage | 12VDC | |
External Light | Power | 3W |
Input Voltage | 12VDC | |
Base | E27 | |
Cable | 303 ON/OFF Power Card | |
FM RADIO | ||
Audio Output | 2 × 3W | |
FM Frequency | 87.5MHz to 108 MHz | |
BATTERY & AC CHARGER | ||
Battery Voltage | 12VDC | |
Battery Type | LiFePO4 Battery | |
Battery Capacity | 12.8V 50AH | |
Floating Charge Voltage | 14.6VDC | |
Overcharge Protection | 14.8VDC | |
MPPT SOLAR CHARGER & AC CHARGER | ||
Maximum PV Array Power | 360W | |
PV Array Open Circuit Voltage Range | 18VDC – 130VDC | |
Max. PV Array Open Circuit Voltage Range | 145VDC | |
Max. Solar Charge Current | 30A | |
MPPT Efficiency | 99.5% | |
Start Charging Current | 16.8V | |
Low Input Voltage Protection Point | 13.8V | |
Max. AC Charge Current | 10A | |
PROTECTION | ||
Overload Protection | Full Load 100%, Inverter Alarm. Overload 120%, Inverter Shuts Down Output in 10s. Once the Load Back to Normal, Inverter Recovers Output. | |
Output Short Circuit | Shut Down Automatically | |
High AC Input Voltage | Turn Off AC, Transfers to Inverter Mode Automatically | |
Low Battery Voltage | Shut Down Automatically. Once the AC Input Recovers, Inverter Turns On and Charge Automatically | |
Over Temperature | Shut Down Automatically | |
SYSTEM | ||
Display | Display | LCD + LED |
Display Contents | Input/Output Voltage, Input/Output Current, Battery Voltage, Battery Capacity, Loading Power, Working Modes | |
Working Modes | 1 – Normal Working Mode, 2 – Solar Priority Mode, 3 – battery – Inverter Mode, 4 – Energy Saving Mode | |
Communication Interface | RS232/SNMP Optional | |
OPERATING ENVIRONMENT | ||
Humidity | 5% to 95% Relative Humidity (Non-Condensing) | |
Altitude | <3000m | |
Operating Temperature | 0°C to 55°C |