SOLAR CHARGE CONTROLLER MPPT 50A KENIKA SCE-1224-50A
Description
Solar Controller: Peralatan elektronik yang digunakan untuk mengatur arus searah yang diisi ke baterai & diambil dari baterai ke beban. Tanpa solar controller, baterai akan rusak oleh overcharging & ketidakstabilan tegangan.
Solar controller Kenika ini menggunakan tipe MPPT. Yang mempunyai banyak keunggulan daripada tipe PWM antara lain:
1. Mampu memaksimalkan faktor pengisian kapasitas secara lebih besar.
2. Mampu mendeteksi daya yang diproduksi solar panel walaupun kecil sehingga dapat melakukan pengisian kapasitas baterai yang dengan lebih cepat.
3. Tegangan input yang tinggi untuk mencharge baterai baik 12V sampai dengan 24V, sehingga efesiensinya lebih baik.
4. Controller yang canggih Maksimum Power Point Tracking teknologi (MPPT) dengan penggunaan efisiensi lebih dari: 99.5%
5. LCD desain panel layar, yang dinamis sehingga menampilkan data operasi alat & kondisi kerja antara lain: tipe sistem tegangan Panel Photovoltaic (PV), Tegangan pengisian Voltage Max:150 Vdc, Mengisi arus, Mengisi daya, Temperatur dll.
Specifications:
Model | SCE-1224-50A | |
MPPT Controller | 50A | |
Wiser2-12V/24V series | ||
Charege Mode | MPPT (Maximum Power Point Tracking) | |
Charege Metode | Three stages: constant current (MPPT), constant voltage, floating charge | |
System Type | DC 12V/24V | Automatic Recognition |
System Voltage | 12V system | DC 9V - DC 17V |
24V system | DC 18V - DC 34V | |
MPPT efficiency | ≥ 99.5% | |
Input Characteristics | ||
Max. PV input voltage | 12V/24V system | DC 150V |
Start the charge voltage point | 12V/24V system | Higher than current baterry voltage 3V |
Low input voltage protection point | 12V/24V system | Higher than current baterry voltage 1V |
Over voltage protection point | 12V/24V system | DC 150V |
High voltage recovery point | 12V/24V system | DC 145V |
Rated PV power | 12V system | 650W |
24V system | 1300W | |
Charge Characteristics | ||
Selectable Battery Types (Default Gel Battery) | 12V/24V system | Flooded,Sealedlead acid, Gel battery (Other types of the batteries also can be defined) |
Constant Voltage | 12V/24V system | Please check the charge voltage according to the battery type form |
Floating Voltage | 12V/24V system | |
Rated charge current | 12V/24V system | 50A |
Temperatur factor | 12V/24V system | ±0.02% / °C |
Temperatur Compensation | 12V/24V system | ‒3mV / °C / 2V (default) |
Output Voltage Stability Precision | 12V/24Vsystem | ≤ ± 1.5% |
Output Discharge Characteristics | ||
USB (Total for 2 USB output) | DC 5V 3A | |
Load output voltage | Based on battery voltage | |
Low voltage output Protection | Default 10.5V,Recovery 11V, It can be adjustable | |
Rated output current | 50A | |
The ouput control | On mode, Off mode, PV voltage control mode, Dual time control mode,PV&Time control mode | |
Output control set mode | Controller button or PC software | |
Display | ||
LCD display | System type, PV voltage, Charge voltage, Charge current, Charge power, temperatur etc. | |
PC software | RS485 | |
PC system for solareagle | Windows 7, 8, 10 | |
Protection | ||
Low voltage input protection | Yes | |
Over voltage input protection | Yes | |
Over Charge power protection | Yes | |
Low voltage output Protection | Yes | |
Rated output current protection | Yes | |
Temperature protection | Yes | |
PV and Battery reverse connection protection | Yes | |
Other Parameters | ||
Noise | ≤ 40dB | |
Thermal heat - dissipating method | Air cooling | |
Certification | CE, FCC, RoHS | |
Physical | ||
Measurement D×W×H (mm) | 243×155×79 | |
Box Dimension (cm) | 29.5×19.5×11.5 | |
Nett Weight (kg) | 1.8 | |
Gross Weight (kg) | 2.5 |